+65 6710 7671 (Service Hotline)
Go to homepage
$0.00*
Categories
Kontaktklebstoffe_Titel

What is special about contact adhesives

The contact makes the difference

What are contact adhesives?


Contact adhesives belong to the group of physically setting adhesives. These are adhesives that cure without a complex chemical reaction. The adhesive is activated and cures solely by the evaporation of the solvent. In the case of chemically setting adhesives, on the other hand, the adhesive is formed by the chemical reaction of polyaddition, polycondensation or polymerization.
Contact adhesives are available as 1-component adhesives, as 2-component systems, and also for spraying, such as our WEICON Spray Adhesive.

What are contact adhesives used for?


Kontaktklebstoffe werden dort benötigt, wo es auf eine hohe Anfangshaftung ankommt und die Verklebung dauerhaft elastisch sowie feuchtigkeitsbeständig sein sollte. Sprühkleber werden beispielsweise im Textildruckverfahren oder im Heimwerkerbereich angewendet.

What are the different types of contact adhesives?

PA_GMK_2510

GMK 2510 Contact Adhesive

The all-rounder for the workshop and the household.


PA_GMK_2410

GMK 2410 Contact Adhesive

Our specialist among contact adhesives.


See details

PA_Spruehkleber

Adhesive Spray

Ideal for cardboard and paper - also a good help for textile printing.



See details

PA_Spruehkleber_extra stark

Adhesive Spray extra strong

Optimal for strong and durable bonding of felt, artificial leather and insulating materials.



See details

PA_Spruehkleber_wieder_loesbar

Adhesive Spray detachable

Suitable especially for light materials and allows small corrections.



See details

How to use contact adhesives?


How are spray adhesives used?


1. Thoroughly clean the bonding surface (e.g. with WEICON Surface Cleaner) - oil, grease, dust, and other contaminants must be removed.

2. Shake can thoroughly.

3. Spray the adhesive onto the areas to be bonded at a distance of 15 - 20 cm.

4. Allow adhesive to flash off.

5. Join the workpieces together.

6. Done.


How is GMK 2410 used?


1. Clean the bonding surface (e.g. with WEICON Surface Cleaner) - oil, grease, dust, and other contaminants must be removed.

2. Apply adhesive evenly, generously and over the entire surface of both parts to be joined.

3. Allow coated surfaces to flash off for ten minutes.

4. Check whether the surface has been sufficiently dehumidified: Does the surface have a silky matt sheen? Or tap the surface with a finger. Does it feel like a sticky note from the office? Top, it can go on.

5. Press surfaces together with short but strong pressure over the entire surface.

6. Done.


How is GMK 2510 used?


1. Clean the bonding surface (e.g. with WEICON Surface Cleaner) - oil, grease, dust, and other contaminants must be removed.

2. Mix the crosslinker with the adhesive.

3. Apply adhesive evenly, generously and over the entire surface of both parts to be joined.

4. Allow coated surfaces to flash off for ten minutes.

5. Check whether the surface has been sufficiently dehumidified: Does the surface have a silky matt sheen? Or tap the surface with a finger. Does it feel like a sticky note from the office? Top, it can go on.

6. Press surfaces together with short but strong pressure over the entire surface.

7. Done.